All sizes are available in Pressure Treated if required.

By purchasing your garden shed Pressure Treated, you will not have to treat it, as it has the treatment impregnated into the timber.

It may seem expensive at the outset, but it is much cheaper in the long term

Malvern Garden Shed Specification

Cladding: A choice of tongue and grooved 12mm deal or cedar shiplap or 20mm Pressure Treated deal shiplap.

Door Size: 5'10" x 2'11" (1.83m x 0.89m)

Window: Joinery made windows, two of which open on all models except Pent sheds with the door in the front, which have one opening window .

Floor: Tongued and grooved floorboards on 2" x 2"(48mm x 48mm) planed floor joists.

Roof: Tongued and grooved match boarding on2" X 2" (48mm x 48mm) planed framing.

Eaves Height: (internal) 1.80mm (5ft 11in) to eave height.

Ridge Height: (internal) 6' wide model 7'4", (2.23mm), 8' wide model 7'9" (2.36mm), 10' wide model 8'2" (2.49mm), 12' wide model 8'8" (2.64mm).

Timber Treatment: Your building will leave the works treated inside and out with a special timber preservative. It is recommended that you treat you shed again within 3 months with a good brand of spirit based timber preservative, and then every other year. If you purchase a Pressure Treated building these do not need further treatment.

Framing: 48mm x 48mm

Optional extras that are available

• Toughened glass
• A full length work bench
• 20mm deal cladding to the floor, door and walls
• 6' wide double doors on 8' models and over in width.
• Stable door
• Pressure treated floor bearers